background image

MN008006EN Manual 

Efective March 2021 

NOVA LBS Load Break Switch  

12 

www.eaton.com/cooperpowerseries 

 

 

3-Wire Ungrounded and Impedance Grounded Systems 

The use of a grounding mat may be required depending upon the local 

safety regulations defining the permissible step and touch potential 

levels. Consult local regulations for proper grounding procedures. 

 
Grounding with a Local Supply Voltage Transformer: 4-Wire 

Multi-Grounded, 3-Wire Ungrounded, or Impedance- Grounded 

Installation with a local supply voltage transformer must 
include the following (refer to Figure 11): 

• Protection of the switch bushings and the supplying 
transformer with lightning arresters. 
• Grounding of the switch head and tank. 
• Grounding of the transformer tank. 
• Grounding of the control cabinet. 
• Grounding of the SCADA equipment. 

 

Figure 11.

 Recommended grounding method for NOVA LBS switches 

with LBC control and local power potential transformer. 
 
 
 
 
 
 
 
 
 
 

Grounding with a Remote Supply Voltage Transformer: 4-Wire 

Multi-Grounded, 3-Wire Ungrounded, or Impedance- Grounded 

Installation with a remote supply voltage transformer must include the 

following (refer to Figure 12): 

• Protection of the switch bushings and the supplying 
transformer with lightning arresters. 
• Grounding of the switch head and tank. 
• Grounding of the transformer tank. 
• Grounding of the control cabinet. 
• Grounding of the SCADA equipment. 

 

Figure 12.

 Recommended grounding method for NOVA LBS switches 

with LBC control and remote power potential transformer. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for NOVA LBS 15


























Reviews: