Eaton i-on16, Administrator'S And User Manual

Page: 45 / 92

i-on16 4. Administration
Page 39
a) Press

.


b) Press

.


c) Press

or

. until the bottom
line of the display shows your own
user name.


d) Press

.


e) Press

or

. until the bottom
line of the display shows:


f) Go on to step 8.
If you are a Normal User:
6. Press

.


7. Press

until the display shows:


8. Press

.
Note: If you already have a prox tag
allocated to you then the screen
will display “Delete Prox Tag?”.
See page 43.


9. Hold the prox tag up to the
keypad.
The keypad gives a double “beep”
confirmation tone. The keypad
display shows:
The control unit learns the identity
of the tag and links it with your
access code.


followed by:


You cannot register more than one tag per user. If you present a tag that
the control unit has already registered to another user then you will hear a
single low tone, the display will show a message that the tag is already in
use and will then revert to asking you to present the tag.
If you do not wish to register a tag for the user then press

.