Eaton i-on16, Administrator'S And User Manual

Page: 23 / 92

i-on16 2. Alarms
Page 17
Acknowledging a Speech Message
If the control unit has Call Acknowledge enabled (ask your installer), then
the person receiving speech messages from the alarm system can control
the link by pressing buttons on their telephone key pad. The commands
available are:
Function Key
End this call (and let the control unit contact the other
destinations for this alarm)
‘5’
Play ‘Home’ and ‘alarm’ message again ‘3’
Clear down (and do not call any of the other destinations for
this alarm).
‘9’
Note: When the called party answers a speech dialler call there is a six
second delay before the control unit starts playing the home
message.
Alerts (or Why is it Beeping?)
From time to time the control unit may detect that there is a problem with
the system. It will try to inform you of this by starting an alert. During an
alert the rim of the navigation pad glows red, and the keypad will give a
short “beep” every few seconds.
To see the cause of the alert:
1. Make sure the system is unset and
that the keypad display shows the
standby screen.


2. Press

.
The display asks you to key in an
access code.


3. Key in a user access code (or
present your proximity tag, see
page 9).
The bottom line of the display
shows a message describing the
most recent active alert, for
example:


4. Either:
Press

to acknowledge that you
have read the alert.