Eaton i-on16, Administrator'S And User Manual

Page: 85 / 92

i-on16 4. Administration
Page 79
Once you have carried out this process, then a user with a Fob-2W-4B can
start a HUA by pressing any two diagonally opposite buttons on their fob at
the same time.
Redirecting Speech Messages
Note: This option is available only if you have the a speech dialler module
fitted inside the control unit and it has been programmed by the
installer. You can use the About menu to check if you have a
communication module fitted, see page 82.
If you need to re-direct speech messages to new telephone numbers then:
1. Make sure the display shows the
standby screen.


2. Press .


3. Key in your access code (or
present a tag).


4. Press

until you see:.


5. Press

.


6. Press

until the display shows:


7. Press

.


8. Press

until the display shows the
telephone number that you wish to
change, for example:


9. Press

.
The display shows the current
phone number, for example:


10. Key in the new phone number.
If necessary, press

to move the
cursor left, or

to move the cursor
to the right. Press

to remove
digits to the left of the cursor.

