Page
5
Hot key
The control unit has a “Hot” key,
which the installer can configure
to generate a “Medical“ alarm or “Social
Care” alert when the key is pressed.
Pressing the indicates that assistance is
needed, and is particularly useful in social-
care applications.
Pendants and wrist-worn transmitters
are also available (see page 3), which
duplicate the operation of the Hot key.
Partitioned and part-setting modes
Your installer has configured your
system either as a part-setting system
or a partitioned system, depending on
your requirements. These two modes are
explained below.
Part-setting mode
In this mode, the control unit can set in
one of four ways: either full set or one of
three part sets (part set B, C or D).
When the system is full set, all zones are
set. When the system is part set, only
the zones that belong to the part set are
set. A part set may, for example, set the
downstairs areas, leaving the upstairs
unset (e.g. for use during the night)
Partitioned mode
This mode is useful if different users need
to independently set and unset different
areas of the building (known as partitions)
at different times. This may occur if, for
example, the building is split into separate
apartments or has an annex occupied by
elderly relatives.
In addition, each partition can be either full
set or part set. This can be useful if you
have an area that needs to be left unset at
certain times (such as the upstairs during
the night).
The system also allows the installer to
define common areas such as hallways,
which set only when you set all associated
partitions.
Depending on requirements, individual
users can be given access to set or unset
one or more partitions.
Calendar setting/unsetting
You can configure the alarm system to
set or unset automatically according to a
schedule. For example, the system could
unset automatically in the morning.
System control using SMS texts
You can use SMS
text messages sent
from a mobile
phone or other
messaging device
to set/unset the
system, activate/deactivate outputs, omit/
un-omit zones or query the current status
of the system.
For further information, please refer to the
SMS Command Messaging User’s Guide.
Multiple users and user types
i-on Style gives you the ability to
define many different users, each
of which has a unique access
code, and can have a different
remote control, medical pendant and
social-care pendant.
You can also assign one of many different
user types to each user to limit the access
each user has to the system.
Wide range of peripherals
i-on Style supports a wide range of
peripheral devices (see from page 2),
which gives the system flexibility to match
current requirements and adapt to meet
future requirements.
Camera integration
The control unit can record
images from network
cameras when an alarm
occurs, and associate those
images with the event.
Summary of Contents for i-on Style
Page 11: ...Page 11 NOTES...