User Menu Options
Page 53
Unset selected partitions (partitioned system, one-way remote control
only).
Note for one-way remote controls:
If you have a part-setting (non-partitioned) system, you cannot
reprogram the unset button.
If you have a partitioned system, the unset button can only be used to
unset some or all partitions allocated to the user. See
Unset, Unset All
and
Unset, Partitions
below.
To re-program the buttons on a remote control:
1.
Select
System Config
– Remotes – Edit
.
The following is displayed:
2.
EITHER:
a)
Press the button on the remote control you want to re-program.
Hold down the button until you see the transmit LED flash.
OR
(if you do not have the remote control):
a)
Press
at the "Press Remote Button" prompt.
b)
Use
or
followed by
to select the remote control you
want to re-program.
c)
The display lists the first button on the remote control:
d)
Use
or
followed by
to select the button you wish to re-
program.
The top line of the display shows the identity of the remote control, the
button you pressed or selected, and the name of the owner. For
example:
3.
Use
or
followed by
to choose the function for the button:
