GridAdvisor™ Series II smart sensor installation instructions
IL915001EN
April 2019
Eaton.com
3
Safety for life
Eaton meets or exceed all applicable industry standards relating to product safety in its products. We actively promote safe
practices in the use and maintenance of our products through our service literature, instructional training programs, and the
continuous efforts of all Eaton’s employees involved in product design, manufacture, marketing, and service.
We strongly urge that you always follow all locally approved safety procedures and safety instructions when working around
high voltage lines and equipment and support our
Safety For Life
mission.
Safety information
The instructions in this manual are not intended as a
substitute for proper training or adequate experience in the
safe installation, operation, servicing and testing of the
equipment described. Only competent technicians who are
familiar with this equipment and these instructions should
install, operate, service and test it.
A competent technician has qualifications including:
•
Is thoroughly familiar with these instructions and
equipment.
•
Is trained in industry-accepted high- and low-voltage safe
operating practices and procedures.
•
Is trained in the care and use of protective equipment such
as arc flash clothing, safety glasses, face shield, hard hat,
rubber gloves, clampstick, hotstick, etc.
Following is important safety information. For safe
installation and operation of this equipment, read and follow
all cautions and instructions.
This manual may contain four types of hazard statements:
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury or equipment damage.
Indicates a hazardous situation which, if not avoided, may
result in equipment damage only.
Safety instructions
Following are general caution and warning statements that apply
to this equipment. Additional statements, related to specific
tasks and procedures, are located throughout the document.
Hazardous voltages are present.
Death, personal injury and equipment damage, can
result if safety precautions are not followed.
Use authorized utility safety procedures to install, test,
and service the GridAdvisor series II smart sensor.
Before installing, operating, maintaining, or testing this
equipment, carefully read and understand the contents
of this document.
Improper operation, handling, or maintenance can result
in death, severe personal injury and equipment damage.
This equipment is not intended to protect human life.
Follow all locally approved procedures and safety
practices when installing or operating this equipment.
Failure to comply may result in death, severe personal
injury and equipment damage.
Hazard Statement Definitions