manualshive.com logo in svg

Eaton FX6000, Installation And Operation Manual

Share
Download
Eaton FX6000 Installation And Operation Manual Download Page 20

20

FX6000 InstAllAtIon And oPerAtIon MAnuAl

  25-14683-C   December 2019   www.eaton.com

Compatible Equipment

Base sounder

The FXN538 has been designed specifically to complement the latest generation of 

Eaton Fire Systems soft addressed detectors . It consists of a first fix bracket, and 

a main body which clips onto the bracket incorporating the sounder and a detector 

mounting base in a single composite assembly .

           FXN538                           FXN538 with Sensor fitted             FXN538 with CASC fitted

After the body has been clicked into place and connected, a detector or front cover is 

then added to complete a very simple quick and neat installation . The cover enables 

the FXN538 to be used as a discreet stand alone wall or ceiling mounted device . 

The sounder base design incorporates a mechanism that can be activated if required 

to lock either the detector or the cover into place to prevent unauthorised removal .

Base sounder beacon

The FXN537 has been designed with the same fixing as the FXN538 so it can 

accommodate either a detector or front cover being fitted .

Summary of Contents for FX6000





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands