FlexPDU User Manual
10
Main interface includes 3 parts: Company Logo, Menu and device states.
A. Device State:
A.
Device state: Click the Device State(AC or DC), user can check the current, voltage, power factor,
Active power, Apparent power, energy consumption, Frequency, Temperature and Humidity senor of
the FlexPDU as figure 2
Input: From the drop-down list
to view the power date of L1,L2 or L3
（
Single phase module
does not have drop-down list
）
From the drop-down list
view the power date or Master unit or Slave units. One
Master unit can support to you 4 Slave unit (Slave 1- Slave 4)
B.
Threshold setting: to set threshold of total load current.See below.
User can set up the threshold of current, voltage, temperature and humidity from the threshold
settings page as figure 3.
Figure 3
Set up the threshold of current, voltage, temperature and humidity
The current of single phase range from 0-63A; three phase range from 0-32A and Direct current
range from 0-60A
The input voltage range from 170-276VAC
The temperate range from 0-40
℃
and humidity range from 0-99%
