BATTERY CABINET INSTALLATION
Eaton FERRUPS Rack Mount UPS (850 VA–7 kVA) Installation Guide
S
164201425 Rev 1
www.eaton.com/powerquality
35
2.
Remove the screws in the RBC-3 rear panel and remove the panel
(see Figure 13).
3.
Remove one of the knockouts underneath the panel and enlarge the
hole so that it is large enough for the positive, negative, and ground
cables.
Rear Panel
Knockouts
Figure 13. RBC-3 Rear Panel and Knockouts
4.
Separate the two slide rails (the rails are shipped already
assembled). To separate, pull the inner rail all the way out. Press
the tab on the inner rail and continue pulling the rail until it comes
apart (see Figure 14).
Inner Rail
Tab
Outer Rail
Figure 14. Separating the Slide Rails
Summary of Contents for FERRUPS
Page 1: ...Powerware Series Eaton FERRUPS Rack Mount UPS Installation Guide...
Page 83: ......
Page 84: ...1642014251 164201425 1 80 z z...
