Eaton ELC Series, Instruction Sheet

Page: 10 / 10

- 9 -
Abnormality Cause How to deal with
RJ-45 poor contact
Check that the RJ45 connector is
properly connected to the Ethernet
RJ-45 port.
100M LED OFF
The module is not
connected to the network
Check if the RJ-45 cable is
correctly connected to the
network.
Transmission speed: 10M
Check if the network transmission
speed is 100Mbps.
RJ-45 poor contact
Check if the RJ45 connector is
properly connected to the Ethernet
RJ-45 port.
Unable to locate
a module Not connected to the
network Check if ELC-CAENET is correctly
connected to the network.
Unable to locate
a module The computer is blocked by
the firewall. Search by IP address or use
RS-232 for settings.
Unable to open
ELC-CAENET
setup screen
Not connected to the
network Check if ELC-CAENET is correctly
connected to the network.
The computer is blocked by
the firewall.
Use RS-232 for settings.
Unable to detect
extension
modules
Not connected to extension
modules
Check if ELC-CAENET is properly
connected to the extension
modules.
Extension modules are not
powered Check that the extension modules
are powered.