Thank you for choosing the Eaton Logic Controller (ELC) series products.
The ELC-CAENET is an Ethernet distributed I/O adapter module that
connects ELC I/O modules to Modbus TCP or EtherNet/IP networks. The
adapter provides I/O and module diagnostic information to Modbus TCP or
EtherNet/IP scanners.
a
This instruction sheet provides information on the electrical
specifications, functionality, installation and wiring for this module. It
should be read and understood before attempting to install or use the
module.
a
Additional information can be found in the ELC series Programming
Manual.
a
The ELC should be kept in an enclosure away from airborne dust,
humidity and vibration.
a
DO NOT disconnect equipment unless power has been switched off or
the area is known to be non hazardous.
a
DO NOT connect AC power to any of the DC input / output terminals, as
it will damage them. Check all wiring prior to power up.
a
Ensure that the ground terminal
is correctly grounded in order to
prevent electromagnetic interference.
Functions
Supports MODBUS TCP
Supports EtherNet/IP
Supports maximum 256 input and/or output points
Supports maximum 14 extension modules
Supports maximum 8 specialty modules
Supports smart PLC functions
Supports counter, timer and RTC
Supports MODBUS TCP/Modbus gateway
Supports RS-232/Ethernet Configuration
Parameters can be set up on webpage
Transmission Speed: 10/100 Mbps
IP Label
IP AD DR ES S
SU BN E T MA SK
MAC Address
0 0D 0AF1 00022
Product Profile & Dimension
4
9
18
8
7 10
1
2
3
5
6
11
14
17
15
13
16
19
12
21
20
STOP
R
S
-485
R
S
-232
ELC
-C
AEN
ET
RUN
BAT.LOW
POWER
RUN
LAN
60
37.4
3
3
9
0
Unit: mm
- 1 -
