Installation Leaflet
Page 10 Effective: November 2002
Pow-R-Command
JCI-100 Controller
IL01412006E
For More Information visit www.cutler-hammer.com
2-8-2 RELAY TERMINATION ADAPTER
BOARD
To more efficiently mount the JCI100 into
Pow-R-Command 100 Control Chassis, an
additional printed circuit board is used. This
printed circuit board in known as a Relay
Termination Adapter Board. The Relay
Termination Adapter Board is used, as the
name alludes, to rotate the mounting
positions for the JCI100 90 degrees. Figure
2-8-2.1 shows a JCI100 mounted on a Relay
Termination Adapter Board in a control
cabinet.
2-9 RELAY CABINET
The Pow-R-Command 100 Relay Cabinet
contains all of the same parts and functions
as the Pow-R-Command 100 Control
Cabinet. However, the Pow-R-Command
100 relay cabinet is constructed to hold 48
relays, and provide an isolated Class 1 area
for load wiring to/from the relays.
Control power is sent to the Relays in a
similar method to Smart Breakers. However,
the relays are mounted directly in the Pow-
R-Command 100 Relay Cabinet as opposed
to being remotely mounted. Figure 2-9.1
illustrated the Pow-R-Command 100 Relay
Cabinet with the JCI100 installed.
Figure 2-8-2.1 JCI100 Mounted On Rotator Board In Control Cabinet
Figure 2-9.1: JCI100 In Relay Panel Less Enclosure