ii
WARRANTY
WARRANTY: Cutler Hammer-Eaton Corporation warrants all products against defects in material and work-
manship for a period of one (1) year from date of shipment to Buyer. This is a limited warranty limited to its
terms. This warranty is void if the product has been altered, misused, taken apart or otherwise abused. ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, ARE EXCLUDED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PURPOSE.
BUYERS REMEDIES: Cutler Hammer-Eaton Corporation’s obligations and liabilities under the foregoing
warranty are limited to repair or replacement of the product without charge, provided it is mailed prepaid to
Cutler Hammer-Eaton Corporation, Durant Instruments, 901 South 12th Street, Watertown, Wisconsin,
53094. A charge is made for repairing after the expiration of the warranty. IN NO EVENT SHALL CUTLER
HAMMER-EATON CORPORATION BE LIABLE FOR CLAIMS BASED UPON BREACH OF EXPRESS OR
IMPLIED WARRANTY OR NEGLIGENCE OR ANY OTHER DAMAGES WHETHER DIRECT, IMMEDIATE,
FORESEEABLE, CONSEQUENTIAL OR SPECIAL OR FOR ANY EXPENSES INCURRED BY REASON OF
THE USE OR MISUSE, SALE OR FABRICATION OF PRODUCTS WHICH DO OR DO NOT CONFORM TO
THE TERMS AND CONDITIONS OF THIS CONTRACT.
INDEMNIFICATION:
Buyer agrees to hold Cutler Hammer-Eaton Corporation harmless from, defend and
indemnify Cutler Hammer-Eaton Corporation against damages, claims and expenses arising out of subse-
quent sales of Durant products or products containing components manufactured by Cutler Hammer-Eaton
Corporation and based upon personal injuries, deaths, property damage, lost profits and other matters for
which Buyer its employees or sub-contractors are or may be to any extent liable, including without limitation
penalties imposed by the Consumer Product Safety Act (P.L.92-573) and liability imposed upon any person
pursuant to the Mansion-Moss Warranty Act (P.L.93-637), as now in effect or amended hereafter. The war-
ranties and remedies provided for herein are available to Buyer and shall not extend to any other person.
COMPLIANCE WITH OSHA: Cutler Hammer-Eaton Corporation offers no warranty and makes no repre-
sentation that its products comply with the provisions or standards of the Occupational Safety and Health Act
of 1970, or any regulations issued thereunder. In no event shall Cutler Hammer-Eaton Corporation be liable
for any loss, damages, fines, penalty or expense arising under said Act.
This manual constitutes proprietary information of Cutler Hammer-Eaton Corporation, and is furnished for the
customer’s use in operating the Series 5886 Count Control. Reproduction of this material for purposes other
than the support of the 5886 Control or related products is prohibited without the prior written consent of Cut-
ler Hammer-Eaton Corporation.
In the construction of the Control described herein, the full intent of the specifications will be met. Cutler Ham-
mer-Eaton Corporation, however reserves the right to make, from time to time and without prior written
notice, such departures from the detail specifications as may be required to permit improvements in the
design of the product.
The information included herein is believed to be accurate and reliable, however, no responsibility is assume
to Cutler Hammer-Eaton Corporation for its use; nor for any infringements of patents or other rights of third
parties which may result from its use.
WARNING:
This equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions manual, may cause interference to radio communications. It has
been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part
15 of FCC Rules, which are designed to provide reasonable protection against such interference when oper-
ated in a commercial environment. Operation of this equipment in a residential area is likely to cause interfer-
ence in which case the user at his own expense will be required to take whatever measures may be required
to correct the interference.