background image

CBC-8000 capacitor bank control description

4

CBC-8000 capacitor bank control installation and operation instructions

    MN916001EN—October 2018    

Eaton.com

Figure 4.  CBC-8000 control front panel.

Programming panel

The Programming panel contains the following sections:

LCD display and keypad

The LCD display is a 4-line, 20-character display.

Equipment misoperation. 

 

 

It is possible to improperly configure or customize the CBC-
8000 control with conflicting settings by using either the

 

front panel HMI or the ProView NXG software. 

 

 

Improper configuration can result in excessive equipment 
operation and eventual damage to the equipment, 

 

 

The user must ensure that a proper combination is created

 

and downloaded for the appropriate device application.

C1110.0

The keypad functionality is summarized as follows:

• The 

 (Up) arrow button can be used for the following 

tasks:

• Scroll to the next item up on the current Menu level.

• If already at the first item of the current Menu level, 

return to the last item of the current Menu.

• When editing a selectable option parameter, scroll up to 

the next available option.

• Change the numerical value from positive to negative or 

vice versa.

• Change the case of a letter when editing Passwords.

Figure 5.  LCD display and keypad functionality.

• The 

 (Down) arrow button can be used to complete the 

following tasks:

• Scroll to the next item down on the current Menu level.

• If scrolled past the last line of the current Menu level, 

return to the first line of the current Menu.

• When editing a Selectable Option Parameter, scroll 

down to the next available option.

• Change the numerical value from positive to negative or 

vice versa.

• Change the case of a letter when editing Passwords.

• The 

 (Left) arrow button is used to go up one Menu level.

• The 

 (Left) arrow button is also used to move left when 

editing parameters.

• The 

 (Right) arrow button is used to go down one Menu 

level.

• The 

 (Right) arrow button is also used to move right 

when editing parameters.

• The ESC (Escape) button is used for the following tasks:

• Go up one Menu level.

• Cancel Edit mode when editing settings without 

changing the value.

CBC-8000

MANUAL

REMOTE

AUTO

TRACKING

ALARMS

NEUTRAL 

LOCKOUT 

RESET

TRIP

CLOSE

MODE

AC POWER

CONTROL OK

TRIP

CLOSE

ALARMS

TRACKING

DATA PORT

ESC

EDIT

ENTER

1

2

3

4

5

6

7

8

9

FUNC

0

SYM

PQRS

XYZ

TUV

GHI

MNO

JKL

DEF

ABC

Summary of Contents for COOPER POWER SERIES



















































Reviews: