background image

20

7   Common operation of the web screens

Installation and Operating Instructions  Web-Controller

   40071860236 (E)   February 2019   www.eaton.com

7 .9   Device information screen

The device information 

screen in the configuration 

menu 

1

 displays informa-

tion about the  

Web-Controller,such as 

device name (freely configu-

rable), software version etc.
It is also possible with sever-

al  Web-Controllers 

in the network to assign a 

logical address to each from 

1 to 32 

2

.

1

7 .10   Configuration screen test times 

On the “Test” tab 

2

 in the 

configuration menu 

1

, it is 

possible to determine start 

times for a function test and 

duration test for up to 8 

groups.
It is also possible to set a 

test interval via which tests 

are cyclically repeated. 

Possible test frequencies:

 

n

Function test: 1-30 days

 

n

Duration test: 30 -365 

days 

The self-contained 

luminaires of the corre-

sponding test groups then 

carry out an automatic func-

tion test of the lamps or a 

duration test of the batteries 

according to these set times.

2

1

2

 NOTE 

If the period of mains failure is greater than 21 days, the com-

plete system should be re-commissioned. Especially the date 

and time must be reconfigured to assure proper sequencing 

Summary of Contents for CGLine+ Web-Controller





























Reviews: