83
ARCON 3G
ARCON 3G MANUAL
MN026015EN October 2020 www.eaton.com
MASTERLINK supports up to 5 MAIN masters connected in the same network. It
operates over Ethernet connection. Each master in the network must have different
address. All MAIN masters can transmit and receive information. Main purpose of
MASTERLINK is to exchange information about arc detection criteria between masters:
•
Criteria di/dt
The topology of MASTERLINK can be set as Line or Ring network when P-No. 2198 is
enabled.
Line
This is single Ethernet connection.
Ring
This is a redundant Ethernet connection. If a connection between two modules gets lost
the system still operate.
Figure 4.2 Complex system – MASTERLINK line topology
Figure 4.3 Complex system – MASTERLINK ring topology
MASTERLINK
Proof 1 — October 29, 2020 3:00 PM
