142
Eaton 93PM-L 20 – 60 kW (208V) UPS Installation and Operation Manual P-164000711—Rev 03
77..33
G
Geenneerraall P
Puurrppoossee R
Reellaayy C
Coonnttaacctt
One general purpose relay contact is provided as a standard feature on the UPS. The relay contact customer
interface terminals are located inside the UPS. Use twisted-pair wires for the normally-closed or normally-open
and common connections.
Normally-closed or normally-open contacts can be used. If the state of the contact changes from the state
specified as normal, a signal is issued. This contact can be connected to equipment at the facility (such as a
light or an alarm bell) to notify the operator when an alarm is active on the UPS. This feature is useful if the UPS
is located in a remote area where the UPS horn may not be heard immediately.
CAUTION
Contacts should not be operated in excess of 30 Vac or 28 Vdc @ 5A.
NOTE
If contact ratings are required that can be operated above the rated voltage and current
available with the UPS general purpose relay contacts, an IRC-MS card should be used.
77..44
P
PrreeddiiccttP
Puullssee R
Reem
moottee M
Moonniittoorriinngg aanndd M
Maannaaggeem
meenntt S
Seerrvviiccee
The Eaton 93PM-L UPS supports Eaton's PredictPulse remote monitoring and management service.
PredictPulse is a subscription monitoring and management service that collects and analyzes data from
connected power infrastructure devices, providing us with the insight needed to make recommendations and
take action on your behalf. It’s also powered by CA Technologies, bringing together the best in hardware and
software. PredictPulse Service is included at no charge during the first year of Eaton 93PM-L UPS operation
(warranty period) along with the required connectivity parts. Beyond that, it may be purchased with Eaton
Support Agreements or as a standalone subscription after the initial warranty expires. PredictPulse may also be
subscribed to for free as part of a 90-day trial period. PredictPulse availability and first year bundled offers may
vary by market. For more information, visit
www.eaton.com/predictpulse
.
77..44..11
P
PrreeddiiccttP
Puullssee S
Seerrvviiccee FFeeaattuurreess
PredictPulse provides proactive monitoring, an online dashboard, mobile app with alarm status information and
a monthly report detailing the ongoing health of your Eaton 93PM-L UPS. Features include:
•
Proactive monitoring that automatically analyzes the status of the Eaton 93PM-L UPS 96 times every day
(every 15 minutes). All health data gathered from the unit, current and historical, is analyzed at the
Customer Reliability Center (CRC). Algorithms and sophisticated analytics software is constantly scanning
your UPS's data for potential failures. Anomalies are escalated to a Software and Monitoring analyst or
Technical Support specialist. Critical events are remotely diagnosed to expedite repairs, including smart
dispatch of field technicians with probable cause and likely parts (avoiding return visits due to lack of
required parts). Through this service, the CRC can take pre-emptive, corrective action to ensure the
highest level of availability of your Eaton 93PM-L UPS.
•
Easy self-installation in minutes from a wizard installer or directly from the PXGMS card. PredictPulse uses
standard Eaton connectivity hardware, requiring no special software (devices only need to be connected to
a network).
•
Ability to give an unlimited number of coworkers access to the real-time data and reports found in
PredictPulse’s online dashboard and mobile app. This allows you to collaborate and Eaton to notify the
most appropriate person responsible for a specific site or device.
•
Real-time access to key performance information, alarms and trended health data about your Eaton 93PM-
L UPS via the PredictPulse online dashboard. Depending on the model, the dashboard aggregates all
subscribed devices and provides detailed information about voltages, loads, energy savings, service levels,
external factors such as temperature and humidity, attached batteries, and system availability. All of these
factors contribute to the Relative Performance Index (RPI) score that allows you to compare your unit's
health relative to Eaton's optimum UPS operating levels.
Summary of Contents for 93PM-L Series
Page 4: ......
Page 164: ...P 16400071103 P 164000711 03...
