Eaton 93PM-L 20–200kW (208V) UPS Installation and Operation Manual 164000724—Rev 01
83
11. Route the wiring along the interface wiring channel (see
) to the UPS building alarm and relay
output terminals. See
and
for UPS interface terminal locations.
12. Secure the wiring to the wire tie anchors provided (see
) using Zip ties.
13. Connect the building alarm interface wiring to the building alarm terminals. See paragraph 3.2.4 and
for wiring and termination requirements, and
for terminal assignments.
14. Connect the relay output interface wiring to the relay output terminals. See paragraph 3.2.4 and
for wiring and termination requirements, and
for terminal assignments.
15. If wiring battery detect connections, proceed to paragraph
Installing Battery Detect Interface Connections
; if wiring battery shunt trip connections, proceed to
paragraph
Installing Battery Shunt Trip Interface Connections
; if wiring bypass shunt trip connections,
proceed to paragraph
Installing Bypass Shunt Trip Interface Connections
;if wiring generator interface
connections, proceed to paragraph
Generator Interface Connections
; if wiring Minislot connections,
proceed to paragraph
Installing Minislot Interface Connections
; if wiring REPO connections, proceed
to paragraph
; otherwise, proceed to
16. Close the UPS outside door and secure the latch.
Summary of Contents for 93PM-L IAC-B
Page 162: ...16400072401 164000724 01 ...
