30
Eaton 93E External Battery Cabinet Installation Manual P-164000057—Rev 05
2.
If installing wiring using conduit, proceed to
; otherwise, proceed to
3.
Punch or drill holes in the bottom of the power terminal cover base (see
and
) for the
DC output conduit and if a second EBC is being installed, for the DC input conduit.
4.
Using the hardware provided, install the terminal cover base to the back panel of the EBC using the
existing cabinet screw holes (see
5.
Proceed to paragraph
Installing EBC External Power Wiring
Figure 16. EBC Power Terminal Cover Parts
Top
Left Side
Right Side
Base
Conduit Landing for DC Input and
Output when using conduit
(Install conduit to bottom of base.)
Wire Hooks
Base (Inside View)
