Eaton 93E External Battery Cabinet Installation Manual P-164000057—Rev 05
25
8.
Remove two bolts securing the pallet extension plate to the pallet and remove the plate (see
).
Retain the plate and bolts for use in
.
9.
Install the pallet extension plate onto the rear of the pallet using the retained bolts (see
). Use
mounting holes provided in the pallet (see
10. Use a forklift or pallet jack between the supports on the bottom of the pallet to lift the pallet by
approximately 3 mm (1/8") and remove the skid (see
Figure 13. Removing the Rear Shipping Bracket – 93E 30EBC
Shipping Bracket
Bolts
Shipping Bracket
Bolts
Pallet Extension Plate
Mounting Holes (2 places)
Rear Shipping Bracket
Pallet
Skid Bolts (3 places)
Removable Skid
NOTE 1
In the following step the pallet tilts and acts as a ramp once the cabinet is rolled beyond
the center of the pallet.
NOTE 2
The pallet extension may bend when the pallet is tilted, but will continue to provide a
smooth transition to the floor.
