Eaton 9000X, User Manual

Page: 54 / 156

9000X AF Drives User Manual
5-12
For more information visit: www.eaton.com MN04001004E
June 2009
System Menu Parameter Comparison Options (S5.4)
Security Menu Parameter Options (S5.5)
Note: The Security submenu is protected with a password. Store the password in a safe place.
S5.4
Parameter
Comparison
Parameter Comparison
With the Parameter Comparison function, you can compare the actual parameter
values to the values of your customized parameter sets and those loaded to the
control keypad.
The actual parameter values are first compared to those of the customized
parameter Set1. If no differences are detected, a “0” is displayed on the lowermost
line of the keypad.
If any of the parameter values differ from those of the Set1 parameters, the number of
the deviations is displayed together with symbol P (e.g. P1
➔
P5 = five deviating values).
By pressing the right arrow button once again you will see both the actual value and
the value it was compared to. In this display, the value on the Description line (in the
middle) is the default value, and the one on the value line (lowermost line) is the
edited value. You can also edit the actual value by pushing the Right Arrow button.
Actual values can also be compared to Set2, Factory Settings and the Keypad Set values.
S5.5.1
Password
Range: 0 – 65535 Default: 0
Password
The application selection can be protected against unauthorized changes with the
Password function. When the password function is enabled, the user will be
prompted to enter a password before application changes, parameter value
changes, or password changes.
By default, the password function is not in use. If you want to activate the password,
change the value of this parameter to any number between 1 and 65535. The
password will be activated after the Timeout time (
Timeout Time
) has expired.
To deactivate the password, reset the parameter value to 0.
P5.5.2
Parameter
Lock
Range: ChangeEnable, ChangeDisabl Default: ChangeDisabl
Parameter Lock
This function allows the user to prohibit changes to the parameters. If the parameter
lock is activated the text *
locked
* will appear on the display if you try to edit a
parameter value.
Note: This function does not prevent unauthorized editing of parameter values.
P5.5.3
Start-Up
Wizard
Range: Yes, No Default: No
Start-up Wizard
The Start-Up Wizard facilitates commissioning the SVX9000/SPX9000. If selected
active, the Start-Up Wizard prompts the operator for the language and application
desired and then advances through the start-up parameter list. After completion it
allows the user to repeat the Start-Up Wizard or return to the default page, the
Operate Menu. The Start-Up Wizard in always active for the initial power up of the
SVX9000/SPX9000.
P5.5.4
Multimonitor
Items
Range: ChangeEnable, ChangeDisabl Default: ChangeEnable
Multimon.items
The keypad display can display three actual monitored values at the same time. This
parameter determines if the operator is allowed to replace the values being
monitored with other values.