Eaton 9000X, User Manual

Page: 12 / 156

9000X AF Drives User Manual
x
For more information visit: www.eaton.com MN04001004E
June 2009
CAUTION
Install the SVX9000/SPX9000 drive on a perpendicular surface that
is able to support the weight of the drive and is not subject to
vibration, to lessen the risk of the drive falling and being damaged
and/or causing personal injury.
CAUTION
Prevent foreign material such as wire clippings or metal shavings
from entering the drive enclosure, as this may cause arcing
damage and fire.
CAUTION
Install the SVX9000/SPX9000 drive in a well-ventilated room that is
not subject to temperature extremes, high humidity, or
condensation, and avoid locations that are directly exposed to
sunlight, or have high concentrations of dust, corrosive gas,
explosive gas, inflammable gas, grinding fluid mist, etc. Improper
installation may result in a fire hazard.
Motor and Equipment Safety
CAUTION
Before starting the motor, check that the motor is mounted properly
and aligned with the driven equipment. Ensure that starting the
motor will not cause personal injury or damage equipment
connected to the motor.
CAUTION
Set the maximum motor speed (frequency) in the SVX9000/
SPX9000 drive according to the requirements of the motor and the
equipment connected to it. Incorrect maximum frequency settings
can cause motor or equipment damage and personal injury.
CAUTION
Before reversing the motor rotation direction, ensure that this will
not cause personal injury or equipment damage.
CAUTION
Make sure that no power correction capacitors are connected to the
SVX9000/SPX9000 output or the motor terminals to prevent
SVX9000/SPX9000 malfunction and potential damage.
CAUTION
Make sure that the SVX9000/SPX9000 output terminals (U, V, W)
are not connected to the utility line power as severe damage to the
SVX9000/SPX9000 may occur.