IB131020EN
Page ii
Effective Mar 2018
WARNING
IMPROPERLY INSTALLING OR MAINTAINING THESE
PRODUCTS CAN RESULT IN DEATH, SERIOUS
PERSONAL INJURY, OR PROPERTY DAMAGE.
READ AND UNDERSTAND THESE INSTRUCTIONS
BEFORE ATTEMPTING ANY UNPACKING, ASSEMBLY,
OPERATION OR MAINTENANCE OF THE CIRCUIT
BREAKERS.
INSTALLATION OR MAINTENANCE SHOULD BE
ATTEMPTED ONLY BY QUALIFIED PERSONNEL. THIS
INSTRUCTION BOOK SHOULD NOT BE CONSIDERED
ALL INCLUSIVE REGARDING INSTALLATION OR
MAINTENANCE PROCEDURES. IF FURTHER
INFORMATION IS REQUIRED, YOU SHOULD CONTACT
EATON.
WARNING
THE CIRCUIT BREAKER ELEMENTS DESCRIBED IN
THIS BOOK ARE DESIGNED AND TESTED TO
OPERATE WITHIN THEIR NAMEPLATE RATINGS.
OPERATION OUTSIDE OF THESE RATINGS MAY
CAUSE THE EQUIPMENT TO FAIL, RESULTING IN
DEATH, BODILY INJURY AND PROPERTY DAMAGE.
ALL SAFETY CODES, SAFETY STANDARDS AND/OR
REGULATIONS AS THEY MAY BE APPLIED TO THIS
TYPE OF EQUIPMENT MUST BE STRICTLY ADHERED
TO.
THESE CIRCUIT BREAKER ELEMENTS ARE DESIGNED
TO BE INSTALLED PURSUANT TO THE AMERICAN
NATIONAL STANDARDS INSTITUTE (ANSI). SERIOUS
INJURY, INCLUDING DEATH, CAN RESULT FROM
FAILURE TO FOLLOW THE PROCEDURES OUTLINED
IN
THIS
MANUAL.
THESE
CIRCUIT
BREAKER
ELEMENTS
ARE
SOLD
PURSUANT
TO
A NON-
STANDARD PURCHASING AGREEMENT WHICH LIMITS
THE LIABILITY OF THE MANUFACTURER.
A l l possible contingencies which may arise during installation, operation or maintenance, and all details and
variations of this equipment do not purport to be covered by these instructions. If further information is desired
by purchaser regarding his particular installation, operation or maintenance of particular equipment, contact an
Eaton representative.