Installation
Eaton
®
Power Xpert 9395 Integrated Battery Cabinet (Model 1085 and 1085HR) Installation Manual 164201687—Rev 06
www.eaton.com/powerquality
4-5
7.
Secure the battery cabinet position by lowering the leveling feet until the cabinet is not resting on the
casters. Ensure the cabinet is level and matches the height of the first installed battery cabinet.
8.
Remove the left-hand and right-hand screws from the adjacent top door hinges of the battery cabinets.
9.
Locate the small flat bracket from the field kit. Align the holes in the small flat bracket over the hinge
screw holes. Replace the screws in the hinges, securing the bracket to the cabinets (see Figure 4-5).
10. Locate the large flat bracket from the field kit. Place the bracket over the bolts on the bottom side of the
adjacent lower hinges on the battery cabinets (see Figure 4-6).
Figure 4-3. Battery Cabinet to Battery Cabinet Joining Brackets
NOTE
Two cabinet joining brackets are provided for securing each cabinet at the top and
bottom. A flat bracket joins the top of the cabinets and a larger flat bracket joins the
cabinets at the bottom. The small flat bracket is attached to the cabinet tops first.
Bracket
from Kit
Existing Screws
Top View with Small Bracket
Battery Cabinet 1
Battery Cabinet 2
Large Bracket
(see Figure 4
‐
4)
