Eaton
®
Power Xpert 9395 Integrated Battery Cabinet (Model 1085 and 1085HR) Installation Manual 164201687—Rev 06
www.eaton.com/powerquality
2-1
Chapter 2
Safety Warnings
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and
maintenance of the batteries. Read all instructions before operating the equipment and save this
manual for future reference.
The battery cabinet is designed for industrial or computer room applications and should be handled
with appropriate care.
DANGER
This battery cabinet contains
LETHAL VOLTAGES
. All repairs and service should be performed by
AUTHORIZED SERVICE PERSONNEL ONLY
. There are
NO USER SERVICEABLE PARTS
inside the UPS.
DANGER!
Cet onduleur peut générer des
TENSIONS MORTELLES
. L’installation et l’entretien ne doivent être
effectués que par le
PERSONNEL AUTORISÉ
. Ne contient
AUCUNE PIÈCE REMPLAÇABLE
.
WARNING
l
This battery cabinet contains its own energy source. The internal wiring and output terminals
may carry live voltage even when the UPS is not connected to an AC source.
l
To reduce the risk of fire or electric shock, install this UPS in a temperature and humidity
controlled, indoor environment, free of conductive contaminants. Ambient temperature must
not exceed 40°C (104°F). Do not operate near water or excessive humidity (95% maximum).
The system is not intended for outdoor use.
l
Ensure all power is disconnected before performing installation or service.
l
Batteries can present a risk of electrical shock or burn from high short.circuit current. The
following precautions should be observed: 1) Remove watches, rings, or other metal objects; 2)
Use tools with insulated handles; 3) Do not lay tools or metal parts on top of batteries; 4) Wear
rubber globes and boots.
l
ELECTRIC ENERGY HAZARD. Do not attempt to alter any battery wiring or connectors.
Attempting to alter wiring can cause injury.
l
Do not open or mutilate batteries. Released electrolyte is harmful to the skin and eyes. It may
be toxic.
CAUTION
l
Installation or servicing should be performed by qualified service personnel knowledgeable of
UPS and battery systems, and required precautions. Keep unauthorized personnel away from
equipment. Consider all warnings, cautions, and notes before installing or servicing equipment.
DO NOT DISCONNECT the batteries while the UPS is in Battery mode.
l
Replace batteries with the same number and type of batteries as originally installed in the
battery cabinet.
l
Disconnect the charging source prior to connecting or disconnecting terminals.
l
Determine if the battery is inadvertently grounded. If it is, remove the source of the ground.
Contacting any part of a grounded battery can cause a risk of electric shock. An electric shock is
less likely if you disconnect the grounding connection before you work on the batteries.