Eaton Compressor POLAR AIR P01PSXXP10V120V208X, User Manual

Page: 7 / 42

Polar Air Electric Operated, Piston Compressors
7
Do not operate unit if damaged during shipping, handling or use.
Damage may result in bursting and cause injury or property damage.
WARNING
1. Make sure lift operator stays aware while moving compressor.
2. Be sure load is secure and well balanced before moving the compressor.
3. Make sure forks are fully engaged and level before lifting or moving compressor.
4. Keep load as low as possible and observe safe operating practices.
1. Carefully inspect all lifting equipment and make sure it is in
good condition. Rated capacity should exceed compressor
weight. Make sure lifting hook has a functional safety latch
or equivalent and is properly attached to lifting feature.
2. Make sure lifting points are in good condition and tighten
any loose nuts or bolts before lifting.
3. Use provided lifting feature or appropriate sling. A sling must
be used when moving compressor with a helicopter or other
air borne equipment. Be sure to follow OSHA standards 29
CFR 1910 Subpart N.
4. Use guide ropes or equivalent to prevent twisting or
swinging of the compressor while it is in the air and
NEVER
attempt to lift in high winds. Keep compressor as
low to the ground as possible.
5. Keep persons away and make sure no one is under the compressor while it is lifted.
6. Only use lifting features provided for entire compressor package.
NEVER
use bolts or other hooks on
invididual components to move the compressor.
7. Make sure to put compressor on a level surface that can support the weight of the compressor and loading
equipment.
Forklift Safety
Lifting Safety