manualshive.com logo in svg

EasyStand Bantam Extra Small, Owner'S Manual, Page: 13 / 31

Share
Download
EasyStand Bantam Extra Small Owner'S Manual Download Page 13

A

B

22.

   

Depress the spring button to allow the bracket  

 

to slide into the H-frame (A). Once you clear the  

 

clamp the spring button needs to be depressed 

 

again and allow the tray to slide into position (B). 

 

Note: There is only one spring button. The spring  

 

button will stop in the maximum height position.  

 

Tighten knobs to secure the tray height.

23.

   

If you ordered the optional Shadow Tray, loosen  

 

the ratchet handles on the side of the tray, flip  

 

the arms up so they are lined up with the tray as  

 

shown and tighten the ratchet handles. Insert  

 

the two tray arms into the tray bracket on the  

 

bottom of the tray. One of the arms is longer  

 

than the other for easier installation (for

 

information on Shadow Tray adjustments    

 

see pg. 15). The bolts on the arms are used as  

 

a stop for future reference. Place the quick   

 

release pins into the holes of the tray to secure  

 

into place.

 

Caution:

 After placing the tray into position,  

 

ensure the ratchet handles on the side of the  

 

tray are tightened securely. 

24.

   

If not already on the unit, remove the knob from  

 

the center post and place the back onto the unit  

 

as shown.

Assembly

Page 10

Summary of Contents for Bantam Extra Small
































Reviews:

No comments