16.
Remove knob and metal washer from the
knee pad, leaving the rubber washer in place on
the knee pad, place the knee pad and rubber
washer onto the knee pad bracket. Place metal
washer and knob onto bolt as shown. Repeat
steps for the opposite side (for information on
knee pad adjustments see pg. 14).
17.
If you ordered the optional Swing-Away Front,
Remove the tray bracket from the H-frame and
set the bracket aside for step 19. Place the H-
frame onto the the base of the unit, making sure
the swivel collar is placed onto the tube insert.
If you ordered a Shadow Tray, please skip to
step 23.
18.
Place the collar onto the frame until the plunger
locks into place. The plunger handle needs to be
pulled out to lock into place.
Assembly
Page 8
Plunger Handle
Tube Insert
Swivel Collar
Metal Washer
