4
Safety Instructions
• Please ensure that the voltages of power supply you are using match with rated
working voltages before operating the machine
• The power supply should be close to the machine for convenient use
• The power supply should provide reliable protective earthing connection
• This machine must be earthed reliably so as to ensure the safety of the machine
during operation
• Only the operators of this machine should operate the electric or motion
components/controls
• Please dont use damaged wires or sockets
• Please keep children away from touching and operating this machine
• Please do not spray water or other liquid on the machine otherwise electric shock
or machine faults could occur
• Please do not replace power cord or plugs yourself, do not put heavy objects on
the power lines as this may cause electric shocks
• During use please take care that no clothes, neckties, hair, necklaces etc are near
the machine otherwise injuries could occur
• Please dont put burrs, sharp blades or over thick rigid materials into the two
rubber covered rollers (for example, tools, rulers and knives etc.)
• Dont cut adhesive films directly on the surfaces of the rubber covered rollers to
avoid damage
• Please shut down this machine after laminating to avoid misuse of the machine
• At the end of the working day always gape the rollers to ensure no flat spots or
distortions occur
• When you need to move this machine, please shut down the power switch and
pull out the plugs
• Please be aware of the location of the wheels during moving or operating this
machine to avoid foot injuries
• Always ensure the machine is positioned on a flat and level floor
• Please shut off the power supply (pull out the power plug) when the machine isnt
going to be used for long periods of time.
• Ambient temperature 10°C - 40°C / 50°F - 104°F, humidity 30% - 80%, Ideal humidity 55%
• Dust - Due to the static adherance of the film, you should keep the environment clean, a dust cover
is provided with the machine
• Please do not keep the machines in direct sunlight
• Please do not keep the machine in or around dusty areas
• Enough space should be kept around the machine to ensure the secure and effective application.
The minimum holding areas are 2.5m x 3m / 8x10ft
Environmental Requirements
