background image

 

AFTER SALES SUPPORT 

 

1 888 367 7373 

    [email protected] 

      10-29-14 / EE-3186A

 

  

 

 
 

Before Each Use 

CHECK HUMIDIFIER PLACEMENT - Place the Humidifier on a non-metallic, lint free, waterproof, level 
surface for best performance.   This is to help disperse the mist in the air and prevent it from being 
knocked or tipped over. 
 
CHECK WATER LEVEL SENSOR – Make sure that the water level sensor is secured properly. Refer to 
“cleaning and maintaining water level sensor” on page 12 for instructions on how to assemble 
the water level sensor. 
 
CHECK FAN VENT 

This fan vent is located on the bottom of the 
humidifier.  The purpose of the Fan Vent is to 
blow the cool mist through the vapor outlet 
slots.  It is important that this part is kept clean 
and free of obstructions.  We recommend 
checking the fan vent before using this item 
(i.e. lint, paper).   

 

Do not place humidifier on top of a towel, or a 
carpeted surface. The fan vent on the bottom 
may become blocked, and overheat the 
humidifier.

 

 

 

 

CAUTION:   
DO NOT operate the humidifier without water in the water tank. 
DO NOT plug in the power supply cord with wet hands; electric shock could happen. 

 

 

Be sure the humidifier is switched to OFF (O) and the humidifier is unplugged from the 
electrical outlet. 

 

Select a location for your humidifier on a flat surface approximately 4 inches away from a 
wall. 

 

DO NOT place the humidifier on a finished floor or near furniture which can be damaged by 
moisture or water.  Place on a water resistant surface. 

 

DO NOT place humidifier on top of a towel, or a carpeted surface. The air vent on the 

bottom may become blocked, and overheat the humidifier.

 

                                                                                        7 

   

 

Getting Started 

 

Summary of Contents for EE-3186A

















Reviews: