Function description:
ENGINE
START
STOP
Push button installation position
1. Push button start/stop
A.When step on foot pedal
1.In disarm status, step on foot pedal, the push button blinks blue color (or red color per the push start button
style you choose), short press the push button once, the vehicle will be started. The push button will turn to
green color (or red color per the push start button style you choose).
Once the vehicle is started, step on foot pedal and press the push button 0.5 second will stop the vehicle. At
the same time, ACC and ON will be turn off and the push button will turn to blue color (or red color per the
push start button style you choose) if the key fob still in PKE induction range.
If the key fob is out of PKE induction range, the push start button will turn off.
2.If the push start button was broken or destroyed or in other situation that unable to use. User can start or
stop the vehicle with below steps:
In disarm status, step on foot pedal, keep pressing start button on the remote control for 3 seconds, the
vehicle will be started.
Step on foot pedal, keep pressing start button 3 seconds on the remote control will cut off the engine and turn
off ACC & ON.
B.When do not step on foot pedal
1.In disarm status, do not step on foot pedal and short press the push button once will turn on ACC. Press
the push button once again will turn on ACC & ON dashboard and press it once again will turn off ACC & ON.
In disarm status, do not step on foot pedal, keep pressing the push start button for 3 seconds will turn off
ACC and ON dashboard and the vehicle engine will be stopped. The push button will turn to blue color (or
red color per the push start button style you choose) if the key fob still in PKE induction range.
If the key fob is out of PKE induction range, the push start button will turn off.
C.Keep pressing the button to start the vehicle
In cold winter or other special situation, user can keep stepping on foot pedal and keep pressing the push
button for 5 seconds to start the vehicle till the vehicle is started. The maximum pressing engine start button time
is 5 seconds. If press 5 seconds but still not able to start the vehicle, please try it again.
Notes: Once the vehicle is armed, then not able to start the vehicle by the push button but need to disarm
first then press the push button to start the vehicle.
D.Remote engine start for back up purpose:
For some special situation such as there is no brake signal or the brake fuse was failed to work, user can use
remote engine start function to start the vehicle, method is keep pressing start button on key fob for 3
seconds will remote start the vehicle, and once the vehicle is started, user keep pressing start button for 3
seconds will cut off the vehicle engine.When use remote engine start/stop function, please keep at least 8
meters away from the vehicle when PKE feature is turn on.
2.PKE(passive keyless entry)
Lock:
Turn off the engine, exit the vehicle and close all doors well and walk away from the vehicle for 3-5
meters away with the key fobs, the alarm siren will beep once and turn signal light flashes once to confirm, at
the same time will lock the door & arm the vehicle automatically. At the same time, the push button turn off
and the vehicle window will roll up automatically (extra window closer module is required for some cars).
Unlock:
When user approach the vehicle in 1-2 meters with key fob in hand or pocket, the turn signal light
turn on 1 second to confirm, at the same time, the alarm is disarm & car door automatically unlock. The push
button turn to blue color (or red color per the push engine start button style you choose). The user can open
car door and get in the vehicle directly.
5.Mute alarm & audible alarm
Turn off the vehicle, lock/arm the alarm, keep pressing lock button for 3 seconds, siren beeps twice, the alarm
is enter into mute alarm function.
Audible alarm (exit mute alarm): Turn off the vehicle, lock/arm the alarm, keep pressing lock button for 3
seconds, siren beeps once, the alarm is enter into audible alarm function.
4.Manual disarm/unlock
Short press unlock button once will unlock the vehicle door, turn signal light turn on 1 second, the vehicle is
disarmed and car door is automatically unlocked. The push start button will turn on blue (or red color per the
push start button style you choose) and PKE function will turn on at the same time.
3.Manual arm/lock
Short press lock button once will lock the vehicle door, turn signal light flashes 1 second and siren beeps
once. At the same time, will turn off PKE function, the push button also turn off and the vehicle window will roll
up automatically (extra window closer module is required for some cars).
6.Remote trunk release
Continue to press trunk release button twice will remote release car trunk, turn signal light will flash 3
times at the same time.
If there is no trunk release button on the remote control, press start button or siren button twice
will release car trunk.
The default trunk release output is 2.5 seconds, if your trunk require 3 seconds output time, press down DIP
switch 2 on control module in power off status( see DIP switch setting on control module)
7.Panic mode/Car finding
In arm status, press lock button once, turn signal light flashes 5 times and siren beeps 5 times to indicate
car location. Press the lock button once again will stop. Siren will not beep when the alarm is in mute alarm
status.
-34-
©
EASYGUARD
Electronics
.
All
right reserved.
-33-
©
EASYGUARD
Electronics
.
All
right reserved.
