Important safety instructions
6
16.
DO NOT obstruct the airflow.
17.
NEVER drop or insert fingers or any object into any opening OR into the area
protected by the guards.
18.
DO NOT operate the fan without the front guard/grill in place.
19.
DO NOT operate the fan directly adjacent to curtains, plants, window covers,
etc. to avoid accidental entanglement or create a fire hazard.
20.
DO NOT use the fan if it has not been fully assembled. Make sure that the
screws that hold the feet and main unit together are tightened securely.
21.
Keep the cord away from heavy traffic areas. To avoid fire hazard, NEVER put
the cord under rugs, radiators or stoves or where it can be tripped over.
22.
To maintain operating efficiency, user should not operate the fan 24 hours a
day, seven days a week.
23.
DO NOT touch hot surfaces. Use handles or knobs.
24.
NOTE:
This fan employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the fan from the
outlet. Replace the fuse and check the fan. If the replacement fuse blows, a
short circuit may be present, and you should contact customer service for
instructions
.
25.
WARNING:
To reduce the risk of fire or electrical shock, do not use this fan
with any solid-state speed control device.
SAVE ALL
INSTRUCTIONS
!
FCC PART 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may cause harmful interference, and (2) this device must accept any
interference received, including interferences that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Summary of Contents for WF-008R
Page 27: ......
