6
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
READ INSTRUCTIONS
• Thoroughly read and understand these product instructions before using the Eastwood Genesis FDM 3D Printer.
• Keep these product instructions for future reference.
BURN HAZARD!
• Contact with the Eastwood Genesis FDM 3D Printer Nozzle, Bed or attachments can cause serious burns.
• This printer generates high heat in the Extruder, Nozzle and Bed area which can exceed 465°F [240°C]. Use extreme caution when
adjusting and printing. Never touch Extruder, Nozzle, Bed and finished printed parts when switch is on. Allow sufficient time for cooling
before touching finished printed parts. Wear protective heat-resistant gloves when using this equipment.
RESPIRATORY HAZARD!
• Melted plastic printer filament can release hazardous or toxic substances. Breathing these fumes can cause serious respiratory health
conditions. Use in a well-ventilated area and always use NIOSH approved respiratory protection while using this Eastwood Genesis
FDM 3D Printer.
EYE INJURY HAZARD!
• Hot plastic may be ejected printing process. Eye protection should be worn at all times when operating this tool. Use ANSI approved
safety glasses. Everyday eyeglasses are NOT safety glasses.
INJURY HAZARD!
•
DO NOT
use finished printed objects to support the weight of a person or valuable property as serious injury or property damage may
occur. Finished objects are for hobby use only.
DO NOT
use objects produced by this printer to replace professionally designed and
manufactured, stress bearing parts in any device or vehicle.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
