18
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
SETTINGS (FIG 34)
The control menu has options for directly controlling temperatures, cooling fan speed,
preheat profile settings, motion control parameters, and firmware settings.
•
Temperature:
Manually sets the temperatures, cooling fan speed, and preheat
profile settings.
-
Nozzle Temp:
Control nozzle temperature set point in degrees Celsius.
-
Bed Temp:
Control bed temperature set point in degrees Celsius.
-
Fan Speed:
Control the part cooling fan speed, the relative adjustment
0 - 255 corresponds to 0 - 100% fan speed.
-
Profile 1 Settings:
Control and save all parameters for this preheat profile.
•
Nozzle Temp
•
Bed Temp
•
Fan Speed
•
Store Settings
-
Profile 2 Settings:
Control and save all parameters for this preheat profile.
•
Nozzle Temp
•
Bed Temp
•
Fan Speed
•
Store Settings
•
Motion:
Parameters under this menu are for maximum limits and transmission
ratios.
•
Store Settings:
Stores the current machine settings to the installed
storage device.
•
Load Settings:
Loads the machine settings stored on the installed
storage device.
•
Restore Defaults:
Resets to factory defaults and wipes the stored profile
on the storage device, if installed.
INFO (FIG 35)
Displays information about the printer size, firmware version, and contact details.
FIG. 34
FIG. 34
DO NOT change unless directed to by Eastwood Technical
Personnel.
FIG. 35
FIG. 35
