background image

PNEUMATIC  

ROTARY REMOVAL TOOL

 INSTRUCTIONS

Item #30216

© Copyright 2014 Easthill Group, Inc.     Instruction part #30216Q     Rev. 6/14

If you have any questions about the use of this product, please contact 

The Eastwood Technical Assistance Service Department: 800.544.5118  >>  email: [email protected]

PDF version of this manual is available online  >>  eastwood.com/30216  manual

The Eastwood Company     263 Shoemaker Road, Pottstown, PA 19464, USA 

US and Canada: 800.345.1178     Outside US: 610.718.8335     Fax: 610.323.6268     eastwood.com

TROUBLESHOOTING 

•  Tool doesn’t respond to trigger depression:

-  Verify sufficient air supply to tool.
-  Check for moisture in air line and tool air inlet.

 

•  Tool performance is slow or sluggish:

    -  Verify sufficient air supply to tool.
    -  Check for moisture in air line and tool air inlet.

 • 

Tool vibrates excessively during use:

    -  Stop use immediately and check for split or broken cleaning or abrasive wheel or belt.
    -  Check for loose Retaining Screw and or Spindle Hex Adapter. 

 

•   Tool emits excessive noise during use:

    -  Stop use immediately and add air tool oil directly to air inlet.

ADDITIONAL ITEMS

#30544 

Replacement Eraser Wheel with Hub

#30545 

Replacement Course Wire Wheel

#30546 

Replacement Medium Wire Wheel

#30547 

Replacement Fine Wire Wheel

#30548 

Replacement Wire Wheel Hub

#30549 

Replacement Stripping Wheel with Hub

Summary of Contents for 30216









Reviews: