© Copyright 2020 Eastwood Automotive Group LLC 5/20 Instruction item #13743Q Rev 1
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: [email protected]
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
800.343.9353 eastwood.com
ADDITIONAL ITEMS
#13474
Eastwood Pneumatic Metal Shear Replacement Blade Set
#28038
Eastwood Sheet Metal Thickness Gauge
#21299
Tilman Cut Resistant Gloves
#21297
Tilman True fit Work Gloves
#20257
Eastwood Sheet Metal Layout Kit
#14752Z
CRC Blue Layout Fluid
PROBLEM
CAUSE
CORRECTION
Shear Fails to
Cut Through
Metal Fully
Metal too thick.
DO NOT attempt to exceed 18 gauge (0.050”)
[1.2mm] mild steel, aluminum and copper or
20 gauge maximum (0.036”) [0.91mm] for
stainless steel.
Cutting Blades
worn
Replace Cutting Blade set with Eastwood #13474.
Air Flows
Through Shear
But Cutting
Blade Does
Not Move
A metal chip
likely has
become
lodged in the
Cutting Blade
Assembly
Disconnect Shear from air supply and use a small
screwdriver or punch to move the Cutting Blade.
After moving the Blade, reconnect to air sup-
ply and depress paddle. Shear should function
normally.
If moving the Blade does not clear the chip, follow
Blade Removal only to Step 3 then reassemble.
TROUBLESHOOTING
