2
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
The
EASTWOOD PNEUMATIC METAL SHEAR
is a heavy-duty, metal working tool capable of many
years of reliable service. It features a high-performance, high-torque, ball bearing motor design with a
hardened planetary gear reduction for quick and efficient operation and long life. Easily cuts stainless
steel, steel and aluminum. Equipped with a 360° positionable cutting head for hard to access projects.
CONTENTS
(1)
Pneumatic Metal Shear
(1)
4mm Hex Key
SPECIFICATIONS
Maximum Material Thickness:
Mild Steel, Aluminum and Copper: 18 Ga (0.050” [1.2mm])
Stainless Steel: 20 Ga (0.036”) [0.91mm]
Air Consumption:
4 CFM @ 90 PSI [113 L/min @ 6.2bar]
Maximum Operating Pressure:
90 PSI [6.2bar]
Strokes Per Minute:
2,500
Inlet Thread Size:
1/4” FNPT
Motor Construction:
4 Vane, Ball Bearing Air Motor with Planetary Gear Set
(1)
1/4” NPT Male Quick Disconnect Fitting
(1)
#13474 Replacement Blade Set
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information
provided with this product:
