To order parts and supplies: 800.343.9353 >> eastwood.com
7
PROBLEM
CAUSE
CORRECTION
Tool Does
Not Respond
to Trigger
Depression
Insufficient
volume of air
(CFM) to
operate tool
Verify sufficient air supply to tool. (4 CFM @ 90
PSI [113 L/min @ 6.2bar] minimum requirement).
Moisture or
other contami-
nation in air
supply
Check for moisture in air line and tool air inlet.
Tool Perfor-
mance is Slow
or Sluggish
Insufficient
volume of air
(CFM) to
operate tool
Verify sufficient air supply to tool. (4 CFM @ 90
PSI [113 L/min @ 6.2bar] minimum requirement).
Moisture or
other contami-
nation in air
supply
Check for moisture in air line and tool air inlet.
Air Motor
is lacking
lubrication
Stop use immediately and add air tool oil directly
to air inlet.
Tool Vibrates
Excessively
During Use
Out of balance
condition from
damaged
Cutting Blade
Stop use immediately, check for and replace
cracked or broken Cutting Blade.
Loose
Clamping
Screws
Tighten loose Clamping Screws.
TROUBLESHOOTING
