MAIN DRIVE
5B6331 – 01JUN99
33
[4] Remove the E-RING and the DRIVE SHAFT
WASHER(S) from the feed end of the DRIVE
SHAFT.
[5] For access to the SPROCKET PIN, move the
DRIVE SHAFT toward the DRYER end.
[6] Remove:
• SPROCKET PIN
• SPROCKET with the DRIVE CHAIN
• 2 THRUST WASHERS
• THRUST BEARING
• BEARING RETAINER
• BEARING
[7] Install a new BEARING and assemble the
PROCESSOR.
H150_0143CA
2 LOCK WASHERS
2 WASHERS
2 SCREWS
H150_0143CCA
MOUNT
BEARING
RETAINER
BEARING
BEARING
FEED END
WASHER
SPROCKET
BEARING
THRUST
E-RING
PIN
SPROCKET
SHAFT
DRIVE
8 WORM
GEARS
DRYER
END
2 THRUST
WASHERS
SHIM
SHIELD
4 SCREWS
4 WASHERS
4 LOCK WASHERS
