OUTDOOR USE ONLY / NEVER LEAVE UNATTENDED
Page 4 of 19
Step 1 ASSEMBLY
Burner Parts Diagram
QCC1 (Type I) Fitting (Attach this end to
Propane Tank with a Type I Connection.)
(Do not use a Wrench to tighten.)
Air Shutter
(Air Shutter Can Be Rotated
To Adjust Flame Quality)
ASSEMBLED BURNER
DRAWINGS
QTY PARTS LIST
1 1. Burner Body
3 2. Legs
1 3. Burner Element
3 4. Burner Grate
1 5. Burner Orifice/Regulator
Hose Assembly
3 6. Burner Housing Bolt
1 7. Air Shutter
1 8. Shutter Spring
3 9. Short Square Bolts
12 10.Flat Washer
12 11. Lock Washers
9 12. Nuts
6 13. Long Square Bolts
1 14. Open End Wrench
SIDE VIEW
Burner Orifice/Regulator
Hose Assembly Connection
(Tighten with Wrench)
TOP VIEW
10.
12.
11.
1.
Regulator
Control Valve
Timer Shutoff
Tools required for assembly:
Adjustable wrench
Water
Liquid detergent
Step 1.1 Burner Assembly
Before you begin, remove all packaging materials. Make sure you have all items shown in the assembly drawing
and parts list. Numbers in parentheses ( ) below refer to the numbers in the part list.
Take burner body (1) and turn it on its
side (figure 1). Attach one leg (2) to
side of burner body by aligning the two
holes on leg with the two holes on side
of burner body (figure 2).
Fig. 1
Fig. 2
