Installation 11
Installation
Carefully unpack the case taper from the shipping carton.
Remove the shipping bolts that secure the Case Taper to the shipping pallet. Lift the
Case Taper of the pallet.
CAUTION!
The SB-2/3EX Standard Case Taper is very heavy and will
require a forklift, floor crane, or several people to move
safely off the shipping pallet. Use proper equipment when
lifting the case taper and ensure the case taper is secure and
will not shift while being moved or during height adjustment
or installation of optional locking casters.
Install the four (4) casters on the Case Taper legs. The casters are very easy to install
simply screw into the threaded holes on the bottom of each leg.
To adjust the leg height, loosen the screws on each leg and slide the insert up or down.
When the leg is at the desired height, retighten the adjustment screws to secure the leg
height.
CAUTION!
The case taper must be lifted off the floor to install the
casters. Use proper equipment when lifting or moving the
case taper. Ensure the case taper is secure and will not shift
while installing the casters or adjusting leg height.
Adjustment
Screws
Caster
Brake
Summary of Contents for SB-2EX
