Adjustments 23
Belt Adjustment
You do not have to remove the drive belt cover to adjust the drive belt. To adjust the
belt, use an Allen wrench and loosen the belt nut. Adjust the belt to a suitable tension by
turning the adjustment screw with a Philips screwdriver. Re-tighten the belt nut.
Machine Body Height Adjustment
To adjust the leg height, loosen the screws on each leg and slide the insert up or down.
When the leg is at the desired height, retighten the adjustment screws to secure the leg
height.
CAUTION!
Ensure the case taper is secure and will not shift while
adjusting leg height.
Adjustment
Screws
Allen Wrench
Phillips
Screwdriver
Summary of Contents for SB-2EX
