Installation 17
Optional Exit Roller Table
An optional exit roller table is available for the case taper that is similar to the entrance
indexing table, less the drop conveyor indexing mechanics. If the exit roller table has not
been installed from the supplier or has been removed for shipping, install it as follows.
1. Temporarily loosen socket head cap screws at the locations shown in the
following illustration.
2. Align the keyhole slots in the table flanges with the loosened cap screw heads
and position the end table so rollers are level with the case taper rollers.
3. Re-tighten cap screws loosened in the first step to secure table.
Next Steps
Follow instructions in the Operation section for instructions to load the tape cartridges in
the upper and lower tape heads.
If tape heads have not been loaded with tape, load the upper and lower tape heads with
tape. (One roll each; follow instructions provided in the Tape Cartridge User Guide.)
Refer to the Adjustments section for instructions to make necessary height and width
adjustments that must be made for operation of the box taper.
Refer to the Operation section for instructions to power up, operate, and shut down the
machine.
Socket Head
Cap Screws
Socket Head
Cap Screws
Summary of Contents for SB-2EX-Auto
