Safety 7
Safety
Read this manual carefully and make it available to everyone connected with the
operation, supervision, or maintenance of this machine. Additional copies are available
on request (Eastey.com/contact-us). Keep this manual with the machine at all times.
The development of a good safety program that is rigidly enforced is absolutely
imperative when involved in the operation of industrial equipment. Our machinery is well
designed and includes extremely important safety features. Proper installation, safe
operation, and regular maintenance and upkeep are of far greater importance than out
design. Only properly trained individuals, following rigidly enforced safety rules as
recommended by ANSI and OSHA should be allowed to operate this machine.
Be very careful when operating, adjusting, or servicing this equipment. Unless used
properly, the machine can cause injury to operators or persons near it. In addition,
improper use of the machine can cause damage to it or property near it. If in doubt, stop
and obtain qualified help before proceeding.
Safety Precautions
Before installing, operating, or servicing this equipment, please read the following
precautions carefully:
•
This machine is equipped with moving belts. Do not place hands near the belts when
they are moving as fingers may be pinched where belts enter the frame. We suggest
the use of a roller-type exit conveyor or pack table for your cases. Always remove
boxes after they clear the exit end of the machine.
•
Use caution when near the tape heads or when threading tape. The tape cutting
knives are very sharp, automatically operated, and linked to tape wipe down rollers.
•
Always disconnect electrical power before attempting maintenance for any electrical
or moving parts. Do not attempt to open or work on the electrical box, junction
boxes, or other electrical components of the unit without first disconnecting power to
the machine. Electrical shock hazard exists if power is not disconnected.
•
Use only the specified power-supply cable. Do not use the power cable to pull or
position the machine, as this will damage or break the cable.
•
Do not bypass any factory-designed safety features such as guards, interlocks,
switches, etc. Do not operate the machine if such modifications have been made.
•
Do not attempt to operate the machine with loads that exceed the limits of use and
operation in regards to weight and sizes, or with unstable loads that present a
hazard of tipping or falling.
•
This equipment is designed for indoor operation in a typical clean, dry factory
environment. Do not operate the machine in any extremely wet or oily environment
that may exceed operating specifications.
Summary of Contents for SB-2EX-Auto
