12 Introduction
past the exit.) V2 indicates 220 volts, 50 amperes and three-phase input. If SP
appears in the model number suffix, this indicates it is a custom model (special
project) and the numbers following SP (final numbers of the model number)
indicate the project number.
Standard Features
•
Designed to shrink-seal polyethylene films
•
All-welded main frame from 12-gauge steel
•
39-inch chamber length to ensure proper shrinking of film
•
Dead roller conveyor for polyethylene
•
Sealed bearings (not bushings) on drive and idler shafts
•
Adjustable solid-state temperature control for a variety of films
•
Four-directional air-flow provides positive shrinking
•
Variable air-flow and air velocity for a variety of products and applications
•
Large ducting creates more air volume inside tunnel
•
Optional side plates (top and sides) for air flow patterning and quick changeover
for different products
•
Delayed cool down and over-temperature protection
•
Heavy duty casters for transportation within plant
•
Leveling legs provide sturdy base once in place
•
Custom two-part epoxy finish resists scratching
•
Available in 220V single-phase or three-phase power input
•
Easy to use design requires minimal training and maintenance, and provides
trouble-free operation
•
Made in the USA
Optional
•
Plastic conveyor belt.
