Eastey EXS-100, User Manual

Page: 7 / 53

Safety 7
Safety
Read this manual carefully and make it available to everyone connected with the
supervision, maintenance, or operation of this machine. Additional copies are available
on request (Eastey.com/contact-us).
The development of a good safety program that is rigidly enforced is absolutely
imperative when involved in the operation of industrial equipment. Our machinery is well
designed and includes extremely important safety features. Proper installation, safe
operation, and regular maintenance and upkeep are of far greater importance than our
design. Only properly trained individuals, following rigidly enforced safety rules, as
recommended by ANSI and OSHA should be allowed to operate this machine.
Be very careful when operating, adjusting, or servicing this equipment. Unless used
properly, the machine can cause injury to operators or persons near it. In addition,
improper use of the machine can cause damage to it or property near it. If in doubt, stop
and obtain qualified help before proceeding.
General Safety Precautions
Before installing, operating or servicing this equipment, please read the following
precautions carefully:
•
Always disconnect electrical power before attempting maintenance for any electrical
or moving parts.
•
Do not tamper with electrical wiring. Use only specified power supply cable. Use only
licensed electricians to check or repair wiring. Do not attempt to open or work on the
electrical box, junction boxes or other electrical components of the unit without first
disconnecting power to the machine. Electrical shock hazard exists if power is not
disconnected.
•
Keep hands and feet away from moving parts. Do not by-pass any factory-designed
safety features such as guards, interlocks, switches, etc.
•
Never provide service or clear a jam when machine is running. Do not place hands
or body inside the confines of the machine unless all mechanisms are securely
fastened and the electrical supply is shut off.
•
Do not stand or climb on any part of the Strapping Machine or its frame.
•
Do not wear loose clothing such as ties, scarves, jewelry etc. Long hair should be
pulled back and/or covered while operating this machine.
•
Always wear safety glasses when operating this machine. Use appropriate
protective equipment whenever required by circumstances or applicable safety rules.
• Do not leave excess scrap strapping material on the floor as it can create a slipping
hazard.