22 Adjustments
Strap Width Adjustment
This machine can accommodate straps ranging in width from 0.19 inches (5mm) to 0.61
inches (15.5mm) in width.
Important:
Shut off power and allow heater element to cool before
making any adjustments.
Note:
Allen wrenches in the set provided with the sealing machine
are required to perform this adjustment procedure.
The plate shown has markings for 0.19 in. (5mm), 0.35 in. (9mm), and 0.47 in.(12mm).
For the 0.61 in. (15.5mm) width setting, pull the adjustment plate outward as far as it will
move. Use the marking on the adjustment plate and then pull the plate out 0.04 in.
(1mm) farther than the mark. Retighten the socket head cap screws to fasten the
adjustment block at the desired strap width.
Summary of Contents for EXS-100
