Eastey BB-2 SS, User Manual

Page: 17 / 37

Installation and Setup 17
Upper Cartridge:
To remove the upper cartridge, it is helpful to lower the upper taping head to its lowest
position. Pull the detent pin and raise the right end of the cartridge first.
Lift the upper cartridge up and out of the machine.
CAUTION! Only lift the tape cartridge by the two lift points. Take
care to keep away from any cutting edges.
Thread Tape
Prepare the tape roll, check tape tension, and thread the tape through the rollers in the
tape head for the upper tape cartridge following the same instructions provided for the
lower tape cartridge.
Detent Pin
Lift
Point
Lift
Point
Detent
Pin