Eastey BB-2 SS, User Manual

Page: 15 / 37

Installation and Setup 15
Check Tension
Check the tape for correct
tension. If the tape head used
with the taper allows for
adjustment of tape tension,
tighten or loosen the tape core
holder to adjust to correct
tension.
Thread Tape
Carefully thread the new tape through the rollers in the tape head as shown in the
applicable diagram in the Tape Head User Guide provided with the tape head. Be
careful to avoid the cutting edges.
For convenience, the diagram for threading tape in the EZ-EX Tape Head, which is the
tape head normally offered with this machine, is provided on the following page. Follow
the diagram that applies for your tape head, depending on the tape head model and
position when installed in the taper.